Aluminum T-Track
$4.23
Closeout Aluminum T-Track Special Product Information
These specialty aluminum t-tracks allow you to slide in 1/4"-20 hex head bolts to mount, position, and hang clamps and fixtures. They are ideal for positioning jigs, stops, and hold-downs on table saws.
To reposition clamps and fixtures, loosen the bolt and slide to new position. Aluminum T-Track Extrusions are available in multiple lengths.
- 47/64" W x 1/2" H (.730" x .490")
- Available 24"
- Clear anodized finish, per MIL-A-8625F
- 6063 ultra-corrosion resistant architectural grade alloy, T5 temper
- Closeout Aluminum T-Slot Track Special features ONLY 2 punched holes 1.5" on both ends on-center to accommodate #8 pan head screws.
- Only limited quantities available. While supplies last.
- Alloy & Temper:6063-T5
- Specification Met:ASTM B221-14
- Made in:America
- Yield Strength:16k PSI-1
- Hardness:Brinell 55
- RoHS:RoHS 3 (2017/2102/EU) Compliant
- REACH:REACH (EC 1907/2006) (06/25/2020, 209 SVHC) Compliant
- DFARS:Specialty Metals COTS-Exempt
- perimeter:3.53
- Materials:See Specification
- Aluminium 95.1%
- Chromium 0-.1%
- Copper 0-0.1%
- Iron 0-0.7%
- Magnesium 0.45-.90%
- Manganese 0-0.10%
- Silicon 0.2-0.6%
- Titanium 0-0.1%
- Zinc 0-0.10%
- Other 0.05-0.15%
Aluminum T-Slot Quad Track
$37.73
T-Slot Dual Quad Track
$47.25
Closeout Round Edge Trim
$7.56
Door Track
$31.30
Flat Bar: 5mm x 40mm
$26.78
Flat Bar: 6mm x 10mm
$8.06
Flat Bar: 4mm x 10mm
$5.33
Aluminum T-Track
$4.23
Aluminum T-Slot Quad Track
$37.73
T-Slot Dual Quad Track
$47.25
Closeout Round Edge Trim
$7.56
Door Track
$31.30
Flat Bar: 5mm x 40mm
$26.78
Flat Bar: 6mm x 10mm
$8.06
Flat Bar: 4mm x 10mm
$5.33
